Chamfer

In this Task 

• The Chamfer tool will be used to create a beveled edge at the lower right corner of the drawing.

Take Note 

• Equal Chamfer distances will always produce a 45° angle.

Chamfer

Ribbon : Modify | 2D Modifications | Chamfer | Distance/Distance

Default Menu : Modify | Chamfer | Distance/Distance

Palette : Modify | Modify | Chamfer Distance/Distance

The Chamfer tool creates a beveled edge at a specified distance between 2 non-parallel lines.The Chamfer tool, with both distances set to zero, connects a perpendicular line between 2 parallel vertices.

Select the Chamfer Distance, Distance tool from the menu options above and use the keyboard TAB key to access the data fields. Input a value of 15 into the Size A and B fields, using the TAB key to move between the fields if necessary.

The result is shown below.